Carbon Steel Flange Material Specifications

Carbon steel is used to make ASTM A350 LF2 Flanges and ASTM A694 Flange and end flange connectors. ASTM A694, ASTM A105N (SA105N), MSS SP-44, and DIN 2533 are all common standards. Classifications for accompanying pressure ratings range from 150 to 2500. Steel having a carbon content of up to 2.1 percent by weight is known as carbon steel. Whereas AISI specifies that no alloy element (minimum content) is needed, such as Cr, Mo, Ni, Ti, Va, and so on, the specified minimum of Cu should not exceed 0.04 percent, the maximum Mn 1.65 percent, and the specified minimum of Si 0.06 percent. We are known as the Largest Suppliers of Carbon Steel Flanges in India.

Refers to Low Carbon Steel Pipe Flanges

Low carbon steel pipe ASTM A350 LF2 Flanges and ASTM A694 Flange are commonly used because they contain a tiny proportion of carbon, are robust and durable, but are difficult to temper. Which might be utilised for a variety of applications because to its cheaper cost and material. Low carbon steel has a carbon content of 0.005 percent to 0.3 percent, medium carbon steel has a carbon content of 0.3 to 0.8 percent, high carbon steel has a carbon content of 0.8-2.0 percent, and ultra high carbon steel has a carbon content of 1.25 percent to 2.0 percent.

ASTM A350 (SA350) LF2 – Low Temperature Use

This carbon steel grade is designed particularly for low-temperature applications and is very comparable to ASTM A105N (SA105N). This grade necessitates exemplary durability testing and is suitable to a wide range of businesses. Low-temperature carbon steel fittings are also made of this carbon steel grade.

Carbon Steel Pipe ASTM A350 LF2 Flanges and ASTM A694 Flange Specifications

Frequently Used ASTM Grades

Carbon Flanges Manufacturers Suppliers in India:-

Carbon Steel Flanges Exporters in India:-